How to attach those lovely strap anchors that sit on the top edge of your bag!
Tools
![Tools](http://blog.bettybp.com.au/wp-content/uploads/2020/04/strap-anchors_tutorial-01.jpg)
You’ll need:
- 3mm hole punch
- hammer
- Phillips head screwdriver
- metal/fabric glue
Step 1
Mark where you’d like the strap anchor to go along the edge of your bag and create your holes.
![Step 1](http://blog.bettybp.com.au/wp-content/uploads/2020/04/strap-anchors_tutorial-02-300x300.jpg)
Step 2
Place a dab of glue on the inside of the strap anchor and push the lugs through your holes.
![Step 2](http://blog.bettybp.com.au/wp-content/uploads/2020/04/strap-anchors_tutorial-03-300x300.jpg)
Step 3
Once the lugs are through place a dab of glue in the centre to double secure the backing plate.
![Step 3](http://blog.bettybp.com.au/wp-content/uploads/2020/04/strap-anchors_tutorial-04-300x300.jpg)
Step 4
Secure the backing plate using the screws.
Tip: to add super long life to your anchor straps as with all screws pop a dab of glue on the end of the screw shaft to ensure they never come out.
![Finished](http://blog.bettybp.com.au/wp-content/uploads/2020/04/strap-anchors_tutorial-07-300x300.jpg)
And you’re done! Enjoy!