A super quick tutorial on how to attach our strap ends.
Such a versatile way to swoosh up the end of your straps and so very quick and easy. What’s not to love!!
![Tools you'll need](http://blog.bettybp.com.au/wp-content/uploads/2020/04/strap-end_tut-01.jpg)
Tools you’ll need
- Completed strap. Same width as your strap end.
- Strap end + screws.
- Small Philips head screwdriver.
- Good craft glue (e.g. Tiger Grip, Beacon Fabric-tac)
Step 1
Run a small line of glue along the inside of your strap end.
![Step 1](http://blog.bettybp.com.au/wp-content/uploads/2020/04/strap-end_tut-02.jpg)
Step 2
Attach your strap end to the top end of your strap.
![Step 2](http://blog.bettybp.com.au/wp-content/uploads/2020/04/strap-end_tut-03.jpg)
Give it a little slide around to ensure a good transfer of the glue onto the top edge of the fabric.
Step 3
Insert and secure the screws into their holes.
![Step 3](http://blog.bettybp.com.au/wp-content/uploads/2020/04/strap-end_tut-04.jpg)
The screws will hold the fabric tight up against the front edge of your strap end – no need to punch holes into the fabric. With the screws and glue you’re secure.
![Finished](http://blog.bettybp.com.au/wp-content/uploads/2020/04/strap-end_tut-05.jpg)
You’re done! Enjoy!